What is the difference between 0.2 and 0.2S class CT?
The metering class current transformer is used for metering the energy for revenue purposes. Therefore, the metering class current transformer must be as accurate as
Harmonics Filters – Cost and Effectiveness
The main characteristic of an electrical system is its waveform which, under all operating conditions and load conditions, must always remain a pure sine wave.
Working Principle of Active Harmonic Filter
The PWM INVERTER technology is the basic building block of an Active Harmonic Filter. Active filters are new generation harmonic filters which use modern technologies
Controlling Multiple Motors with one VFD
In many applications, we use a single VFD for multiple motors. In this method, more than one motor is connected to a single VFD drive.
Role of Test & Measurement in Harmonic Studies
What are Harmonic Studies? Power electronics is being used popularly in industries due to ease of operation and maintenance. It is also possible to achieve
Why is double earthing necessary for 3-phase machines and equipment?
Why Earthing Important? The main purpose of the earthing of electrical equipment is to avoid the danger of getting electric shock. The proper earthing also
What is the Required Capacitor KVAR for 50 HP Motor?
The motor draws inductive current when a 50 HP induction motor is run by feeding a three-phase AC supply. At the no-load running of the
What is Knee Voltage of PN- Junction Diode?
Definition: The voltage at which the forward-biased diode starts conducting is called the knee voltage or cut-in voltage of the PN junction diode. The Mechanism
Accuracy Limit Factor of Current Transformer
Definition- The accuracy limit factor (ALF) of a current transformer (CT) is a parameter that indicates the highest multiple of the rated current at which
Difference between Active and Passive Components
In this post, we will discuss the difference between Active and Passive components. We can differentiate active & passive components on the basis of the