High Resistance Grounding
In a High Resistance Grounding (HRG), the neutral point or star point of the transformer or generator is connected to one end of high resistance
Basics
Step-by-Step Guide to Choose Right Fuse for a Panel
This article describes a step-by-step guide to choose the right fuse for a panel. The fuse in the control panel is used to protect against
Lenz’s Law of Electromagnetic Induction: Definition, Statement & Formula
💡 Key learnings: Lenz’s Law Explained: Lenz’s Law states that the induced current in a conductor flows in a direction such that the magnetic field
Difference between Flame Resistant and Flame Retardant Cables
In this post, we will discuss the difference between flame-resistant and flame-retardant cables. The cables are widely used for the transmission of power and signals.
Difference between Leading and Lagging Power Factor
In this article, we will discuss the power factor – leading power factor and lagging power factor, and the important differences between the leading power
Parallel Circuits and the Application of Ohm’s Law
In parallel circuits, the voltage differences across all the electrical components are equal. It means the component share the same electrical nodes. The total circuit
Calculating Electric Power
We can calculate the electric power by multiplying the voltage and current. When we apply voltage to an electric circuit, the circuit draws current. The
Why is the frequency of AC in India 50 Hz while in US 60Hz?
In this article, we will discuss the important reasons for using a 50 Hz AC power system in India over a 60 Hz AC power
Difference Between Volt and Amp with Comparison Chart
The two important electricity terms are volt and amp. Both these electrical quantities are closely related and may be difficult to understand. In this article,
What is Recording Instrument? – Definition & Explanation
The recording instrument records the continuous variation of the magnitude of an electrical quantity for a particular period. They are widely used for those applications where the continuous reading of specific parameters is required. The recorded